Armable (126)

Item Condition: New Code: FMW 052 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 7cm x 4cm x 4cm It is a simple open vehicle with two very large driving wheels on an axle below and slightly behind a single seat with the engine in front of the driver and two steering wheels below the engine compartment. This basic design has remained unchanged for many years. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW054 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 11cm x 3.5cm x 9cm Material: Metal Recommended age range: 14+ The UNITED STATES CAPITOL BUILDING model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Located in Washington DC, the Capitol is the meeting place of the United States Congress. It sits atop Capitol Hill, which is located at the eastern end of the National Mall. Construction began on September 18, 1793. The Capitol is built in the distinctive American Neoclassical style with a white marble exterior. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: F MW056 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 9cm x 2.5cm x 3.2cm It marked the beginning of a new class of automobile known as the pony car. Its revolutionary design with the long hood and short bed proved very popular and, according to Ford, 22,000 orders were taken on debut day. The Mustang featured a base 170 cubic inch six-cylinder engine with a three-speed floor-shift transmission, full wheel covers, bucket seats, carpets, and a padded dashboard, all for a base retail price of $2,320. An optional 260 cubic inch V-8 engine was also available. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW058 Number of Sheets: 1 Sheet Difficulty Level: Moderate Dimensions: 2.6cm x 2.6cm x 16cm Material: Metal Recommended age range: 14+ The TOWER CN model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. This concrete observation and communications tower in downtown Toronto, Canada, stands at 553 m (1,815 ft). When it was completed in 1976, it was the tallest freestanding structure in the world. The CN Tower is a symbol of Canadian achievement and in 1995 was declared one of the Seven Wonders of the modern World by the American Society of Civil Engineers. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW059 Number of Sheets: 3 Sheets Difficulty Level: Expert Dimensions: 8.2cm x 4.2cm x 3.5cm Material: Metal Recommended age range: 14+ The PARTHENON model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. It is a temple located on the Acropolis of Athens in Greece and dedicated to the maiden goddess Athena, whom the people of Athens considered their patron deity. Construction began in 447 BC. C. when the Athenian Empire was at the height of its power and was completed in 438 BC. The Parthenon is the most recognizable enduring symbol of ancient Greece, Athenian democracy, and Western civilization. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW060 Number of Sheets: 1 Sheet Difficulty Level: Moderate Dimensions: 8.2cm x 4.2cm x 3.5cm Material: Metal Recommended age range: 14+ The TOWER OF THE AMERICAS model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Tower of the Americas is a 750-foot restaurant/observation tower on the southeast edge of downtown San Antonio, Texas, USA. The tower was built as a thematic structure for the 1968 World's Fair. It was the tallest observation tower in the United States until 1996, when the Stratosphere Tower in Las Vegas was completed. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW061 Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 6cm x 2.9cm x 9.5cm Material: Metal Recommended age range: 14+ The 30 ROCKEFELLER PLAZA model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. It was known as the RCA Building until 1988 and is known today as the GE Building. It also bears the nickname 30 Rock and is famous for being the headquarters of the NBC television network. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Code: FMW062 Number of Sheets: 1 Sheet Recommended age: 14+ Difficulty Level: Moderate Dimensions: 10.1cm x 5.2cm x 3cm It was a long-range Mach 3.5+ strategic reconnaissance aircraft developed by Lockheed and its Skunk Works® division. It was the first aircraft built primarily of titanium. At full speed, the plane's surface heats up to over 500°F (260°C+). A total of 3,551 missions were flown and not a single Blackbird was lost due to enemy military retaliation. Note: Skunk Works is the nickname for Lockheed's Advanced Development Programs. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW063 Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 12.1cm x 3.5cm x 3.7cm Material: Metal Recommended age range: 14+ The GRAF ZEPPELIN model kit It is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. It was a hydrogen-filled rigid airship that operated commercially from 1928 to 1937. During that time it made 590 flights and flew more than a million miles. The Zeppelin could reach a maximum speed of 80 mph (70 knots) with its maximum thrust of 2,650 horsepower and had a usable payload of 15,000 kg (33,000 lbs). FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW064 Number of Sheets: 1 Sheet Difficulty Level: Moderate Dimensions: 10.9cm x 9.2cm x 3cm Material: Metal Recommended age range: 14+ The DRAGONFLY model kit It is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. It has large multifaceted eyes, two pairs of strong transparent wings and an elongated body. Dragonflies are among the fastest flying insects in the world, capable of reaching speeds of more than 40 miles per hour. They are important predators that eat mosquitoes and other small insects such as flies, bees, ants and wasps. They are usually found around swamps, lakes, ponds, streams, and wetlands. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW065 Number of Sheets: 2 Sheets Difficulty Level: Easy Recommended age range: 14+ Dimensions: 8.5cm x 5.5cm x 5cm THE FLINTSTONES CAR model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW067 Number of Sheets: 1 Sheet Difficulty Level: Moderate Dimensions: 13.2cm x 8.8cm x 2.6cm Material: Metal Recommended age range: 14+ The AVRO LANCASTER BOMBER model kit It is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. It is a British four-engine heavy bomber used by the RAF in World War II. It became the most successful night bomber of the war, flying 156,000 sorties. The bomber earned additional distinction for carrying the famous Maintenance "bouncing bomb" for Operation Chastise in attacks on dams in the Ruhr Valley. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

DISCONTINUED MODEL - LAST UNITS WORLDWIDE Item Condition: New Code: FMW070 Number of Sheets: 1 Sheet Difficulty Level: Moderate Dimensions: 12cm x 8.2cm x 5.2cm Material: Metal Recommended age range: 14+ The SCORPION model kit It is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. This predatory arachnid has eight legs and is easily recognized by a pair of prehensile claws and a narrow, segmented tail that is often carried in a characteristic forward curve over its back, and ends with a venomous stinger. Scorpions can grow up to 20 cm. Its venom has a fearsome reputation, but only about 25 of the nearly 1,500 species are known to have venom capable of killing a human. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW078 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 6cm x 6cm x 5.5cm Material: Metal Recommended age range: 14+ The APOLLO LUNAR MODULE model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. It was a two-part spacecraft used to transport a crew of two from lunar orbit to the surface of the moon and back. The descent stage served as the launch pad for the ascent stage and also housed the landing gear, engines, and fuel needed to land. Six of these spacecraft successfully landed on the Moon between 1969 and 1972. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW080 Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 7.5cm x 5.9cm x 6.8cm Material: Metal Recommended age range: 14+ The GRAND PIANO model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Grand Piano: It is a musical instrument played with a keyboard consisting of 52 white keys and 36 black keys that cover a range of more than seven octaves. The Grand Piano is designed so that its frame and strings are parallel to the floor with the strings extending outward from the keyboard. The piano also includes 3 pedals that are used to change the sound of the instrument in various ways. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

DISCONTINUED MODEL - LAST UNITS WORLDWIDE Item Condition: New Code: FMW083 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 12.2cm x 12cm x 5.5cm The APACHE HELICOPTER model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Originally produced by McDonnell Douglas, this Boeing twin-engine army attack helicopter first entered service with the US Army in 1984. Since then, it has become the primary attack helicopter for many nations. More than 2,000 have been produced. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW091 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 14.7cm x 11.3cm x 4.3cm The B-17 FLYING FORTRESS model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. It starts with 2 square sheets of steel and ends in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. It is a 4-engine heavy bomber used in World War II. It was a powerful, high-flying, long-range bomber that was able to defend itself and return home despite extensive battle damage. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW 092 Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 7.9cm x 3.3cm x 10.5cm Recommended age range: 14+ The Metal Earth Crawler Crane model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. It starts with 2 square sheets of steel and ends in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. It is a crane that is mounted on top of a tracked vehicle. They all have large counterweights placed at the back of the crane that allow them to lift and move very heavy loads without tipping over. Its lifting capacity ranges between 30 and 3000 tons. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW094 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 9cm x 4.5cm x 5.8cm Material: Metal Recommended age range: 14+ The APOLLO LUNAR ROVER model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. It was affectionately known as the moon buggy. It was used on the moon in the last three missions of the American Apollo program (15, 16, 17) during 1971 and 1972. Powered by only two silver oxide batteries, Apollo 17 was able to drive for 35.74 km (22.21 miles). ) across the surface of the moon. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW097 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 14cm x 2.5cm x 5.1cm The USS ARIZONA BATTLESHIP model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. She was a Pennsylvania-class battleship, built in the mid-1910s and modernized in 1931. She was bombed and sunk in the attack on Pearl Harbor on December 7, 1941, in which officers and crew died .  FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW 105 Number of Sheets: 4 Sheets Difficulty Level: Challenging Dimensions: Oil Tanker: 12.2cm x 2.3cm x 3cm, Offshore Oil Platform: 4.1cm x 4.1cm x 8.3cm Material: Metal The Metal Off Shore Oil Rig & Oil Tanker model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Offshore oil platform: is a large structure with facilities to drill wells (optionally), extract and process oil and natural gas, or temporarily store the product until it can be brought to shore for refining and marketing. Tanker: is a merchant ship designed for the bulk transportation of oil. There are two basic types of tankers: crude tankers and product tankers. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW127 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 9.9cm x 3.4cm x 8.4cm The GAME OF THRONES-RED KEEP model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Red Keep is the seat fortress of the King of the Seven Kingdoms and the Iron Throne. It is located atop Aegon's High Hill, in King's Landing, the capital of the Seven Kingdoms. Overlooking the city from the top of Aegon's High Hill, it is an impressive fortress built of light red stone. The wall, which largely rises directly above the cliffs at the mouth of the Blackwater River, delimits an interior perimeter with seven enormous towers, flattened and crowned by iron bastions. In the barbican is the Traitor's Walk, at the end of which there is a low semicircular tower, where the entrance to the dungeons is, behind a wrought iron door and another made of splintered gray wood; On the middle floors are the rooms of the Chief Jailer, the Lord Confessor and the King's Justice and on the upper floor cells with a certain level of comfort. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW 145 Number of Sheets: 2 Sheets Difficulty Level: Challenging Recommended age range: 14+ Dimensions: 7.8cm x 3.2cm x 5.5cm The Metal Freightliner Coe Truck model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 2 4-inch square sheets of steel and end up with a 3.07" x 1.26" x 2.17" 3D model. Simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs, and connect them into the fixing points.No glue or soldering required.  FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Code: MMS177 Number of Sheets: 3 Sheets Difficulty Level: Challenging Dimensions: 10cm x 4.2cm x 4.8cm The Metal Earth Phantom model kit It is an incredibly detailed engraved model, which is very fun and satisfying to put together. Starts with 3 4-inch square sheets of steel and ends in a 4.25" x 1.65" x 2.09" 3D model Simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW 178 Number of Sheets: 3 Sheets Difficulty Level: Expert Dimensions: 9.8cm x 3.7cm x 6.8cm Recommended age range: 14+ The Metal Earth Log Truck model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 3 4-inch square sheets of steel and end up with a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED