Armable (126)

Code: FMW 182 Item Condition: New Number of Sheets: 3 Sheets Difficulty Level: Expert Dimensions: 7.8cm x 4.7cm x 4.2cm Color: Orange Recommended age range: 14+ The Metal Earth Mining Truck model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. It starts with 3 4-inch square sheets of steel and ends up in a 3D model. Simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Whether you transport copper, coal, gold, iron ore or overload, the mining truck offers you the best production cost per unit. Including improvements in safety, productivity, serviceability and comfort, you'll see why more mining sites choose it for their production needs. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: MMS183 Number of Sheets: 2 Sheets Difficulty Level: Challenge Dimensions: 9.2cm x 3.3cm x 1.5cm The Metal Earth Wheel Loader model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 2 4-inch square steel sheets, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and attach them at the attachment points. No glue or soldering required. Specifically designed to handle all jobs on your job site, from material handling and truck loading to general construction and warehousing. This machine is specially designed to be the right machine to perform your daily tasks. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: MMS184 Number of Sheets: 3 Sheets Difficulty Level: Challenging Dimensions: 13cm x 4.6cm x 3.5cm The Metal Earth Motor Grader model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 3 4-inch square steel sheets, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and attach them at the attachment points. No glue or soldering required. Cat® motor graders have become the industry standard for operational efficiency and overall productivity. The motor grader is designed to help you build and maintain the haul roads needed to support maximum efficiency in large mining operations. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Code: FMW 185 Number of Sheets: 2 Sheets Difficulty Level: Challenging Dimensions: 11.6cm x 3.7cm x 6.4cm Recommended age range: 14+ Color: Orange The Metal Earth Excavator model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 3 4-inch square sheets of steel and end up with a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The excavator is designed for low operating costs, simple routine maintenance, high productivity and long-term durability. Incorporates innovations to improve performance and versatility. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW201 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 7.5cm x 4cm x 3cm The T-34 TANK model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The T-34 tank was a Soviet tank produced between 1940 and 1958. Although its armor and armament were surpassed by later tanks of World War II, it is often considered the most effective, efficient, and influential tank design of the Soviet era. the Second World War.  FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

DISCONTINUED MODEL - LAST UNITS WORLDWIDE Item Condition: New Code: FMW202 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 8cm x 3.5cm x 3.7cm The TANK CHI HA model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Chi Ha tank was built by Mitsubishi and designated CHI-HA. It used the 170 horsepower Mitsubishi air-cooled diesel engine and was considered the best tank Japan had produced during World War II. The main armament consisted of a single 57 mm gun mounted in the turret and supported by two 7.7 mm self-defense machine guns. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

DISCONTINUED MODEL - LAST UNITS WORLDWIDE Item Condition: New Code: FMW203 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 7.3cm x 4.5cm x 3cm The TANK TIGER I model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. This German tank was the most powerful tank in the world when it was introduced in August 1942. The 88mm gun was extremely powerful and the heavy armor made it almost impervious to attack. The success of the Tiger was so profound that no Allied tank dared to engage in open combat. This psychological fear soon became known as "tigerphobia." FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW204 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 7.3cm x 4.5cm x 3cm The TANK SHERMAN model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Sherman tank was the main tank used by the United States during World War II. The tank is named after Union General William Tecumseh Sherman. Production exceeded 50,000 units. Only the Soviet T-34 tank was produced in large quantities during World War II. Although totally inadequate against the 56-ton German Tiger I and 72-ton Tiger II, mobility, mechanical reliability and sheer numbers helped offset its disadvantages strategically. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW250 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 5cm x 3.5cm x 7cm Material: Metal The R2-D2 model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. R2-D2 is a robot character in the Star Wars universe. An astromech droid is a major character in all of the Star Wars films. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW251 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 7.2cm x 5.6cm x 4.6cm Material: Metal The MILLENIUM FALCON model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. A legendary starship despite its humble origins and deceptively dilapidated exterior, the Millennium Falcon has been a factor in some of the Rebel Alliance's greatest victories over the Empire. Before Han Solo won it in a game of chance, it was owned by Lando Calrissian. Solo and his first officer, Chewbacca, flew the Millennium Falcon into movie history. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW252 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 6.2cm x 5.8cm x 5.2cm The IMPERIAL AT-AT model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. All Terrain Armored Transports, or AT-AT for short. They first appear in Empire Strikes Back. AT-ATs are 50 feet tall and look like giant four-legged monsters. The head serves as the control center and support for the walker's weapons. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW253 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 7.6cm x 6.8cm x 2.5cm The STAR WARS TIE FIGHTER model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Darth Vader's TIE Fighter is the prototype that was used as the basis for all the terrifyingly effective TIE Fighters and Interceptors that would be developed for future battles. The TIE Fighter has proven itself in battle, as it is capable of withstanding many direct hits. Additionally, the pilots' chances of survival were greatly increased with the addition of a hyperpropulsion system, which allows the ship to escape desperate battle situations. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW254 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 10.4cm x 6cm x 5.9cm The IMPERIAL STAR DESTROYER model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Designed to strike awe and terror into the hearts of the Rebels, the Imperial Star Destroyer and the rest of the Empire's fleet of starships maintain order in the galaxy through displays of power and ruthless fighting tactics. It's a capital ship. It first appears in the opening seconds of Star Wars and is the flagship of the Imperial fleet. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW255 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 5cm x 4.9cm x 8.6cm The DESTROYER DROID model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Destroyer Droids, also known as Droidekas, were used by the Trade Federation during the invasion of the planet Naboo. These droids had shield generators and could curl into a ball to move quickly. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW256 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 6.5cm x 6cm x 7.3cm The TIE FIGHTER model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. TIE Fighters are one-man starfighters with a spherical cockpit, hexagonal wings, and two chin-mounted laser cannons. The basic TIE fighter first appeared in A New Hope and is the main Imperial fighter seen in the Original Trilogy. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW258 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 8.3cm x 7.4cm x 3.2cm The SNOWSPEEDER model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. While stationed on Hoth, the Rebel Alliance modified T-47 airspeeders into snowspeeders, fast flying means of transport to patrol and defend their hidden base. It took some work to prevent the crippling cold from permanently grounding their air force, but Rebel ingenuity overcame Hoth's relentless elements. The T-47 hovercraft is a small wedge-shaped craft with two forward-facing laser cannons. On its rear bow is a harpoon cannon equipped with a heavy-duty tow cable. The snowspeeder is a two-man craft, with a pilot and a rear-facing tail gunner. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW259 Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 12.7cm x 6.4cm x 11.1cm Material: Metal Recommended age range: 14+ The IMPERIAL SHUTTLE model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. An elegant example that stands apart from typical brutal Imperial engineering, the Lambda-class shuttle is a multipurpose transport used in the Imperial Starfleet. The Empire put the ferry into service for both cargo transportation and passenger service. Even the Empire's elite, such as Darth Vader and Emperor Palpatine, used these shuttles. It has three wings: a stationary central blade and two articulated flanking wings. When in flight, the side wings deploy for greater stabilization. Upon landing, the wings fold, shrinking the silhouette of the boat. The well-armed ship has two forward-facing twin laser cannons, two wing-mounted twin cannons, and a rear-facing twin laser cannon. It is equipped with a hyperdrive. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW260 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 7.8cm x 5.1cm x 8.8cm Material: Metal Recommended age range: 14+ The SLAVE I model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The deadly ship was famous for its association with Jango Fett, a bounty hunter in Mandalorian armor. Fett filled the ship with weapons, from laser cannons and projectile launchers to seismic charges. After Jango's death, Boba Fett refitted the ship and made it his own. A generation after his father's death, the distinctive ship was still the last thing the fugitives wanted to see on their scanners. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW261 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 4.5cm x 6.8cm x 8.1cm Material: Metal Recommended age range: 14+ The STAR-WARS-AT-ST model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. While not as imposing as its larger AT-AT walker cousin, the AT-ST served as a significant addition to the Imperial side of the battlefields in the Galactic Civil War. The two-man ship is lightly armed with chin-mounted laser cannons and side-mounted weapon pods. The two-legged transport, nicknamed by many as the Scout Walker, serves as a reconnaissance and patrol vehicle, often flanking approaching AT-ATs and eliminating infantry that sneak past larger walkers. The Imperials used AT-STs in both the Battle of Hoth and the Battle of Endor. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW266 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 7.5cm x 4.8cm x 10.8cm Material: Metal Recommended age range: 14+ The KYLO REN'S COMMAND SHUTTLE model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Kylo Ren's Command Shuttle was an Upsilon-class command shuttle used by Lord Kylo Ren, who was a member of the Knights of Ren and the First Order around thirty years after the Battle of Endor. The First Order's top officers travel in Upsilon-class command shuttles that resemble shadowy birds of prey. The enormous wings of these ships are packed with defensive systems to protect their valuable passengers. The upper wings contain advanced sensor arrays that scan for enemies, while the lower wings house efficient shield projectors and powerful jammers. Upon landing, the wings lift from flight mode and then retract, covering the upper wing sensor arrays with thick armor. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW267 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 7.8cm x 6.1cm x 12.7cm Material: Metal Recommended age range: 14+ The SPECIAL FORCES TIE FIGHTER model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. A two-seat strike fighter used by the elite pilots of the First Order Special Forces, the TIE/SF features much more powerful weapons than a standard TIE, combining laser cannons with a heavy turret and warhead launcher. Special Forces TIEs have hyperdrives, deflector shields, and high-performance cells that provide additional power to onboard systems. These versatile attack ships are used for everything from reconnaissance to combat operations. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW268 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 8.3cm x 3.4cm x 5.7cm Material: Metal Recommended age range: 14+ The FIRST ORDER SNOWSPEEDER model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. These fast and versatile light utility vehicles are useful for a variety of missions on Starkiller Base and other icy worlds. The First Order's favorite snowspeeder model is as simple as it is rugged: essentially a pair of seats, cargo deck, turbines, and a deck-mounted repeater blaster. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW269 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 10.5cm x 10.1cm x 5cm Material: Metal Recommended age range: 14+ The POE DAMERON'S X-WING FIGHTER model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The T-70 X-wing starfighter is an updated incarnation of the classic T-65B X-wing starfighter manufactured for the New Republic Starfleet. More expensive and complex than the earlier T-65B, the T-70 featured advanced weaponry and proved more versatile than its predecessor, and was essential in both aerial combat and capital ship-scale combat operations. Appropriate S-foil designs allowed for greater firing range, while four KX12 laser cannons offered single, double and quad firing modes. A built-in twin proton torpedo launcher with quick-change magazines allowed the use of alternative armaments. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW280 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 12.7cm x 6cm x 6cm The ENTERPRISE NCC-1701 model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. NCC-1701 was a Federation Constitution-class heavy cruiser that saw service with Starfleet in the mid-to-late 23rd century. Over the course of its career, the Enterprise became the most celebrated starship of its time. The Enterprise was destroyed over the Genesis Planet in 2285 when Kirk activated the ship's self-destruct sequence to prevent the Enterprise from falling into Klingon hands. The most famous captain of the Enterprise was James T. Kirk! FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW281 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 8.8cm x 6.5cm x 4.2cm The USS ENTERPRISE NCC-1701-D model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. NCC-1701-D is a 24th century starship in the fictional Star Trek universe and the setting for the television series Star Trek: The Next Generation. It is a Galaxy-class ship and the fifth Federation starship in the Star Trek universe to bear the Enterprise name. For most of its service, the commanding officer of the Enterprise D is Captain Jean-Luc Picard. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW282 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 8.8cm x 6.5cm x 4.2cm The USS ENTERPRISE NCC-1701-D model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Bird of Prey is one of the most common Klingon ships seen in the Star Trek franchise. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW283 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 10.9cm x 8.2cm x 4.5cm The KLINGON VORCHA model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Vor'Cha-class attack cruiser is a powerful ship that debuted in the Next Generation episode "Reunion." Its combat role is said to be comparable to that of a heavy cruiser. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW291 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 7.8cm x 4cm x 3.8cm The MASTER CHIEF HELMET model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Warthog is the UNSC's primary ground transport vehicle, with the M12B Force Application Vehicle (FAV) being the most ubiquitous variant. Equipped with a full rotation turret and heavy machine gun, the M12B FAV serves as a multi-role combat vehicle that can engage light armored vehicles and enemy aircraft with equal effectiveness. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW292 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 9.8cm x 8cm x 4.8cm The UNSC PELICAN model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Available in a staggering number of unique models and variants, the D-79 Pelican dropship is the UNSC's most recognizable troop and materiel transport. These workspace ships are equally at home in orbit and in the atmosphere, and have even been pressed for use on short interplanetary voyages. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED