Item Condition: New Code: FMW258 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 8.3cm x 7.4cm x 3.2cm The SNOWSPEEDER model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. While stationed on Hoth, the Rebel Alliance modified T-47 airspeeders into snowspeeders, fast flying means of transport to patrol and defend their hidden base. It took some work to prevent the crippling cold from permanently grounding their air force, but Rebel ingenuity overcame Hoth's relentless elements. The T-47 hovercraft is a small wedge-shaped craft with two forward-facing laser cannons. On its rear bow is a harpoon cannon equipped with a heavy-duty tow cable. The snowspeeder is a two-man craft, with a pilot and a rear-facing tail gunner. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW266 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 7.5cm x 4.8cm x 10.8cm Material: Metal Recommended age range: 14+ The KYLO REN'S COMMAND SHUTTLE model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Kylo Ren's Command Shuttle was an Upsilon-class command shuttle used by Lord Kylo Ren, who was a member of the Knights of Ren and the First Order around thirty years after the Battle of Endor. The First Order's top officers travel in Upsilon-class command shuttles that resemble shadowy birds of prey. The enormous wings of these ships are packed with defensive systems to protect their valuable passengers. The upper wings contain advanced sensor arrays that scan for enemies, while the lower wings house efficient shield projectors and powerful jammers. Upon landing, the wings lift from flight mode and then retract, covering the upper wing sensor arrays with thick armor. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW267 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 7.8cm x 6.1cm x 12.7cm Material: Metal Recommended age range: 14+ The SPECIAL FORCES TIE FIGHTER model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. A two-seat strike fighter used by the elite pilots of the First Order Special Forces, the TIE/SF features much more powerful weapons than a standard TIE, combining laser cannons with a heavy turret and warhead launcher. Special Forces TIEs have hyperdrives, deflector shields, and high-performance cells that provide additional power to onboard systems. These versatile attack ships are used for everything from reconnaissance to combat operations. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: ICX018 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 7.8cm x 6.1cm x 12.7cm Material: Metal Recommended age range: 14+ The BIG BEN PREMIUM SERIES model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Big Ben is the nickname for the large clock bell at the north end of the Palace of Westminster in London, although today the name also refers to the clock and clock tower. The bell weighs almost 14 tons and each clock face is 23 feet in diameter. It became fully operational on September 7, 1859 and today is one of the most prominent symbols of London at 316 feet high. The clock requires winding three times a week and pennies are periodically added to or removed from the pendulum clock to maintain its accuracy. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW261 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 4.5cm x 6.8cm x 8.1cm Material: Metal Recommended age range: 14+ The STAR-WARS-AT-ST model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. While not as imposing as its larger AT-AT walker cousin, the AT-ST served as a significant addition to the Imperial side of the battlefields in the Galactic Civil War. The two-man ship is lightly armed with chin-mounted laser cannons and side-mounted weapon pods. The two-legged transport, nicknamed by many as the Scout Walker, serves as a reconnaissance and patrol vehicle, often flanking approaching AT-ATs and eliminating infantry that sneak past larger walkers. The Imperials used AT-STs in both the Battle of Hoth and the Battle of Endor. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW259 Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 12.7cm x 6.4cm x 11.1cm Material: Metal Recommended age range: 14+ The IMPERIAL SHUTTLE model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. An elegant example that stands apart from typical brutal Imperial engineering, the Lambda-class shuttle is a multipurpose transport used in the Imperial Starfleet. The Empire put the ferry into service for both cargo transportation and passenger service. Even the Empire's elite, such as Darth Vader and Emperor Palpatine, used these shuttles. It has three wings: a stationary central blade and two articulated flanking wings. When in flight, the side wings deploy for greater stabilization. Upon landing, the wings fold, shrinking the silhouette of the boat. The well-armed ship has two forward-facing twin laser cannons, two wing-mounted twin cannons, and a rear-facing twin laser cannon. It is equipped with a hyperdrive. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW094 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 9cm x 4.5cm x 5.8cm Material: Metal Recommended age range: 14+ The APOLLO LUNAR ROVER model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. It was affectionately known as the moon buggy. It was used on the moon in the last three missions of the American Apollo program (15, 16, 17) during 1971 and 1972. Powered by only two silver oxide batteries, Apollo 17 was able to drive for 35.74 km (22.21 miles). ) across the surface of the moon. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW091 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 14.7cm x 11.3cm x 4.3cm The B-17 FLYING FORTRESS model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. It starts with 2 square sheets of steel and ends in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. It is a 4-engine heavy bomber used in World War II. It was a powerful, high-flying, long-range bomber that was able to defend itself and return home despite extensive battle damage. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW049G Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 11cm x 3.5cm x 9cm Material: Metal Recommended age range: 14+ The GOLDEN HIND model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Golden Hind or Hinde was an English galleon best known for its circumnavigation of the globe between 1577 and 1580, captained by Sir Francis Drake. She was originally known as Pelican, but Drake renamed her mid-voyage in 1578, as he was preparing to enter the Strait of Magellan, and called her Golden Hind to compliment his patron, Sir Christopher Hatton, whose coat of arms It was a gold. hind' (a female deer). Hatton was a major sponsor of Drake's world tour. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: ICX006 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 8.9cm x 6.6cm x 8.9cm Recommended age range: 14+ The SAIN BASIL'S CATHEDRAL model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. It starts with 3 square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. St. Basil's, commonly known as St. Basil's Cathedral, is a former church on Red Square in Moscow, Russia. The building, now converted into a museum, is officially known as the Cathedral of the Intercession of the Most Holy Mother of God in the Moat. It was built between 1555 and 1561 by order of Ivan the Terrible and commemorates the capture of Kazan and Astrakhan. A world-famous landmark, it has been the center of the city's growth since the 14th century and was the tallest building in the city until the completion of the Belfry of Ivan the Great in 1600.  FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: ICX004 Number of Sheets: 2 Sheets Difficulty Level: Challenging Dimensions: 8.9cm x 8.9cm x 6.35cm Recommended age range: 14+ The TAJ MAHAL model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. It starts with 3 square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. It is a white marble mausoleum located in Agra, Uttar Pradesh, India. It was built by the Mughal emperor Shah Jahan in memory of his third wife, Mumtaz Mahal. The Taj Mahal is widely recognized as "the jewel of Muslim art in India and one of the universally admired masterpieces of world heritage." FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW283 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 10.9cm x 8.2cm x 4.5cm The KLINGON VORCHA model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Vor'Cha-class attack cruiser is a powerful ship that debuted in the Next Generation episode "Reunion." Its combat role is said to be comparable to that of a heavy cruiser. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW282 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 8.8cm x 6.5cm x 4.2cm The USS ENTERPRISE NCC-1701-D model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Bird of Prey is one of the most common Klingon ships seen in the Star Trek franchise. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW280 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 12.7cm x 6cm x 6cm The ENTERPRISE NCC-1701 model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. NCC-1701 was a Federation Constitution-class heavy cruiser that saw service with Starfleet in the mid-to-late 23rd century. Over the course of its career, the Enterprise became the most celebrated starship of its time. The Enterprise was destroyed over the Genesis Planet in 2285 when Kirk activated the ship's self-destruct sequence to prevent the Enterprise from falling into Klingon hands. The most famous captain of the Enterprise was James T. Kirk! FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW256 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 6.5cm x 6cm x 7.3cm The TIE FIGHTER model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. TIE Fighters are one-man starfighters with a spherical cockpit, hexagonal wings, and two chin-mounted laser cannons. The basic TIE fighter first appeared in A New Hope and is the main Imperial fighter seen in the Original Trilogy. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW255 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 5cm x 4.9cm x 8.6cm The DESTROYER DROID model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Destroyer Droids, also known as Droidekas, were used by the Trade Federation during the invasion of the planet Naboo. These droids had shield generators and could curl into a ball to move quickly. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW254 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 10.4cm x 6cm x 5.9cm The IMPERIAL STAR DESTROYER model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Designed to strike awe and terror into the hearts of the Rebels, the Imperial Star Destroyer and the rest of the Empire's fleet of starships maintain order in the galaxy through displays of power and ruthless fighting tactics. It's a capital ship. It first appears in the opening seconds of Star Wars and is the flagship of the Imperial fleet. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW253 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 7.6cm x 6.8cm x 2.5cm The STAR WARS TIE FIGHTER model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Darth Vader's TIE Fighter is the prototype that was used as the basis for all the terrifyingly effective TIE Fighters and Interceptors that would be developed for future battles. The TIE Fighter has proven itself in battle, as it is capable of withstanding many direct hits. Additionally, the pilots' chances of survival were greatly increased with the addition of a hyperpropulsion system, which allows the ship to escape desperate battle situations. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW252 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 6.2cm x 5.8cm x 5.2cm The IMPERIAL AT-AT model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. All Terrain Armored Transports, or AT-AT for short. They first appear in Empire Strikes Back. AT-ATs are 50 feet tall and look like giant four-legged monsters. The head serves as the control center and support for the walker's weapons. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW204 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 7.3cm x 4.5cm x 3cm The TANK SHERMAN model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Sherman tank was the main tank used by the United States during World War II. The tank is named after Union General William Tecumseh Sherman. Production exceeded 50,000 units. Only the Soviet T-34 tank was produced in large quantities during World War II. Although totally inadequate against the 56-ton German Tiger I and 72-ton Tiger II, mobility, mechanical reliability and sheer numbers helped offset its disadvantages strategically. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW078 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 6cm x 6cm x 5.5cm Material: Metal Recommended age range: 14+ The APOLLO LUNAR MODULE model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. It was a two-part spacecraft used to transport a crew of two from lunar orbit to the surface of the moon and back. The descent stage served as the launch pad for the ascent stage and also housed the landing gear, engines, and fuel needed to land. Six of these spacecraft successfully landed on the Moon between 1969 and 1972. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW063 Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 12.1cm x 3.5cm x 3.7cm Material: Metal Recommended age range: 14+ The GRAF ZEPPELIN model kit It is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. It was a hydrogen-filled rigid airship that operated commercially from 1928 to 1937. During that time it made 590 flights and flew more than a million miles. The Zeppelin could reach a maximum speed of 80 mph (70 knots) with its maximum thrust of 2,650 horsepower and had a usable payload of 15,000 kg (33,000 lbs). FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW061 Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 6cm x 2.9cm x 9.5cm Material: Metal Recommended age range: 14+ The 30 ROCKEFELLER PLAZA model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. It was known as the RCA Building until 1988 and is known today as the GE Building. It also bears the nickname 30 Rock and is famous for being the headquarters of the NBC television network. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW060 Number of Sheets: 1 Sheet Difficulty Level: Moderate Dimensions: 8.2cm x 4.2cm x 3.5cm Material: Metal Recommended age range: 14+ The TOWER OF THE AMERICAS model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Tower of the Americas is a 750-foot restaurant/observation tower on the southeast edge of downtown San Antonio, Texas, USA. The tower was built as a thematic structure for the 1968 World's Fair. It was the tallest observation tower in the United States until 1996, when the Stratosphere Tower in Las Vegas was completed. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW059 Number of Sheets: 3 Sheets Difficulty Level: Expert Dimensions: 8.2cm x 4.2cm x 3.5cm Material: Metal Recommended age range: 14+ The PARTHENON model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. It is a temple located on the Acropolis of Athens in Greece and dedicated to the maiden goddess Athena, whom the people of Athens considered their patron deity. Construction began in 447 BC. C. when the Athenian Empire was at the height of its power and was completed in 438 BC. The Parthenon is the most recognizable enduring symbol of ancient Greece, Athenian democracy, and Western civilization. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW058 Number of Sheets: 1 Sheet Difficulty Level: Moderate Dimensions: 2.6cm x 2.6cm x 16cm Material: Metal Recommended age range: 14+ The TOWER CN model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. This concrete observation and communications tower in downtown Toronto, Canada, stands at 553 m (1,815 ft). When it was completed in 1976, it was the tallest freestanding structure in the world. The CN Tower is a symbol of Canadian achievement and in 1995 was declared one of the Seven Wonders of the modern World by the American Society of Civil Engineers. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW054 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 11cm x 3.5cm x 9cm Material: Metal Recommended age range: 14+ The UNITED STATES CAPITOL BUILDING model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Located in Washington DC, the Capitol is the meeting place of the United States Congress. It sits atop Capitol Hill, which is located at the eastern end of the National Mall. Construction began on September 18, 1793. The Capitol is built in the distinctive American Neoclassical style with a white marble exterior. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW049 Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 11cm x 3.5cm x 9cm Material: Metal Recommended age range: 14+ The GOLDEN HIND model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Golden Hind or Hinde was an English galleon best known for its circumnavigation of the globe between 1577 and 1580, captained by Sir Francis Drake. She was originally known as Pelican, but Drake renamed her mid-voyage in 1578, as he was preparing to enter the Strait of Magellan, and called her Golden Hind to compliment his patron, Sir Christopher Hatton, whose coat of arms It was a gold. hind' (a female deer). Hatton was a major sponsor of Drake's world tour. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW048 Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 13.7cm x 2.3cm x 5cm Material: Metal Recommended age range: 14+ The BROOKLYN BRIDGE model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Brooklyn Bridge is located in New York City and is one of the oldest suspension bridges in the United States. Completed in 1883, it connects the boroughs of Manhattan and Brooklyn across the East River. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW044 Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 7.5cm x 3.3cm x 9.1cm Material: Metal Recommended age range: 14+ The FERRIS WHEEL model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The first modern Ferris wheel was designed and built by George Washington Ferris as a landmark for the 1893 World's Columbian Exposition in Chicago. Later, the term Ferris wheel was used generically for all of these structures. As of 2012, the Singapore Flyer at 541 feet tall is the tallest wheel in the world. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW042 Number of Sheets: 1 Sheet Difficulty Level: Moderate Dimensions: 10cm x 5.1cm x 2.1cm Material: Metal Recommended age range: 14+ The WRIGHT BROTHERS AIRPLANE model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. On December 17, 1903, Orville Wright piloted the first powered airplane to 20 feet over a windswept beach in North Carolina. The flight lasted 12 seconds and covered 120 feet. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW041 Number of Sheets: 1 Sheet Difficulty Level: Easy Dimensions: 5.2cm x 5.2cm x 6.5cm Material: Metal Recommended age range: 14+ The LIBERTY BELL model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Located in Philadelphia, Pennsylvania, the Liberty Bell is an iconic symbol of American independence. Above the bell are read the words "Proclaim FREEDOM throughout the land to all its inhabitants." It weighs 2,080 pounds and is suspended from what is believed to be its original yoke, made of American elm. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED