Buildable Stainless Steel Models (93)

DISCONTINUED MODEL - LAST UNITS WORLDWIDE Item Condition: New Code: FMW028 Number of Sheets: 1 Leaf Difficulty Level: Moderate Dimensions: 12.5cm x 10cm x 2cm Material: Metal Recommended age range: 14+ The MITSUBISHI ZERO model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Mitsubishi Zero is a long-range fighter aircraft operated by the Imperial Japanese Navy Air Service. When first introduced early in World War II, the Zero was considered the world's most capable carrier-based fighter, combining long-range capabilities with excellent maneuverability. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Code: FMW 185 Number of Sheets: 2 Sheets Difficulty Level: Challenging Dimensions: 11.6cm x 3.7cm x 6.4cm Recommended age range: 14+ Color: Orange The Metal Earth Excavator model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 3 4-inch square sheets of steel and end up with a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The excavator is designed for low operating costs, simple routine maintenance, high productivity and long-term durability. Incorporates innovations to improve performance and versatility. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

DISCONTINUED MODEL - LAST UNITS WORLDWIDE Item Condition: New Code: FMW202 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 8cm x 3.5cm x 3.7cm The TANK CHI HA model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Chi Ha tank was built by Mitsubishi and designated CHI-HA. It used the 170 horsepower Mitsubishi air-cooled diesel engine and was considered the best tank Japan had produced during World War II. The main armament consisted of a single 57 mm gun mounted in the turret and supported by two 7.7 mm self-defense machine guns. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

DISCONTINUED MODEL - LAST UNITS WORLDWIDE Item Condition: New Code: ICX020 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 14.6cm x 4.5cm x 7.6cm Recommended age range: 14+ The CLASSIC BYCYCLE model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. It starts with 3 square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. First seen in the 1880s, it was labeled as the safety bicycle. It featured wheels of the same size, a chain drive on the rear wheel, pneumatic tires, and a front wheel with a significant swivel wheel. Susan B. Anthony, the American feminist, called it the first bicycle suitable for women and called it the “freedom machine.” FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

DISCONTINUED MODEL - LAST UNITS WORLDWIDE Item Condition: New Code: FMW043 Number of Sheets: 1 Sheet Difficulty Level: Moderate Dimensions: 12.2cm x 9cm x 2.4cm Material: Metal Recommended age range: 14+ The SPIRIT OF SANT LUIS model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Spirit of Saint Louis was the first aircraft to fly solo, non-stop, across the Atlantic. On May 20, 1927, at 7:52 a.m., this custom-built single-seat, single-engine monoplane piloted by Charles Lindbergh departed Long Island, New York, on its historic flight. After 33.5 hours and 3,600 miles, the plane arrived safely at Le Bourget Field in Paris. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

DISCONTINUED MODEL - LAST UNITS WORLDWIDE Item Condition: New Code: FMW016 Number of Sheets: 1 Leaf Difficulty Level: Easy Dimensions: 4.1cm x 4cm x 11.5cm Material: Metal Recommended age range: 14+ The EIFFEL TOWER model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Located on the Champ de Mars in Paris, the Eiffel Tower has become a global icon of France and one of the most recognizable structures in the world. Named after its designer, engineer Gustave Eiffel, the tower was built as the entrance arch to the 1889 World's Fair and stands 1,063 feet tall. It was the tallest man-made structure in the world until the Chrysler Building was built in 1930. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

DISCONTINUED MODEL - LAST UNITS WORLDWIDE Item Condition: New Code: FMW083 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 12.2cm x 12cm x 5.5cm The APACHE HELICOPTER model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Originally produced by McDonnell Douglas, this Boeing twin-engine army attack helicopter first entered service with the US Army in 1984. Since then, it has become the primary attack helicopter for many nations. More than 2,000 have been produced. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Code: ICX136 Number of Sheets: 3 Sheets Difficulty Level: Expert Dimensions: 21.4cm x 3.7cm x 6.8cm Recommended age range: 14+ The Metal Earth Log Truck & Trailer model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. It starts with 3 square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW 145 Number of Sheets: 2 Sheets Difficulty Level: Challenging Recommended age range: 14+ Dimensions: 7.8cm x 3.2cm x 5.5cm The Metal Freightliner Coe Truck model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 2 4-inch square sheets of steel and end up with a 3.07" x 1.26" x 2.17" 3D model. Simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs, and connect them into the fixing points.No glue or soldering required.  FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW 178 Number of Sheets: 3 Sheets Difficulty Level: Expert Dimensions: 9.8cm x 3.7cm x 6.8cm Recommended age range: 14+ The Metal Earth Log Truck model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 3 4-inch square sheets of steel and end up with a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Code: FMW 182 Item Condition: New Number of Sheets: 3 Sheets Difficulty Level: Expert Dimensions: 7.8cm x 4.7cm x 4.2cm Color: Orange Recommended age range: 14+ The Metal Earth Mining Truck model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. It starts with 3 4-inch square sheets of steel and ends up in a 3D model. Simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Whether you transport copper, coal, gold, iron ore or overload, the mining truck offers you the best production cost per unit. Including improvements in safety, productivity, serviceability and comfort, you'll see why more mining sites choose it for their production needs. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW 105 Number of Sheets: 4 Sheets Difficulty Level: Challenging Dimensions: Oil Tanker: 12.2cm x 2.3cm x 3cm, Offshore Oil Platform: 4.1cm x 4.1cm x 8.3cm Material: Metal The Metal Off Shore Oil Rig & Oil Tanker model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Offshore oil platform: is a large structure with facilities to drill wells (optionally), extract and process oil and natural gas, or temporarily store the product until it can be brought to shore for refining and marketing. Tanker: is a merchant ship designed for the bulk transportation of oil. There are two basic types of tankers: crude tankers and product tankers. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW127 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 9.9cm x 3.4cm x 8.4cm The GAME OF THRONES-RED KEEP model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Red Keep is the seat fortress of the King of the Seven Kingdoms and the Iron Throne. It is located atop Aegon's High Hill, in King's Landing, the capital of the Seven Kingdoms. Overlooking the city from the top of Aegon's High Hill, it is an impressive fortress built of light red stone. The wall, which largely rises directly above the cliffs at the mouth of the Blackwater River, delimits an interior perimeter with seven enormous towers, flattened and crowned by iron bastions. In the barbican is the Traitor's Walk, at the end of which there is a low semicircular tower, where the entrance to the dungeons is, behind a wrought iron door and another made of splintered gray wood; On the middle floors are the rooms of the Chief Jailer, the Lord Confessor and the King's Justice and on the upper floor cells with a certain level of comfort. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW065 Number of Sheets: 2 Sheets Difficulty Level: Easy Recommended age range: 14+ Dimensions: 8.5cm x 5.5cm x 5cm THE FLINTSTONES CAR model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW322 Number of Sheets: 3 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 6.4cm x 5.7cm x 12.1cm The IRON MAN model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Injured, captured, and forced to build a weapon by his enemies, billionaire industrialist Tony Stark created advanced armor to save his life and escape captivity. Now, with a new outlook on life, Tony uses his money and intelligence to make the world a better and safer place as Iron Man. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW372 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 9.1cm x 3.7cm x 2.1cm The BATMOBILE model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Batmobile is Batman's primary means of transportation. The vehicle is one of the most intimidating components in his vast arsenal, so it is stored in the Batcave when not in use. Affectionately nicknamed the "Keaton mobile" after Michael Keaton; the actor who played Batman/Bruce Wayne in the films at the time, the car's popularity among fans has established a large following and easily ranks with the 1966 Batmobile as one of the most popular Batmobiles of all time. . FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW377 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 5.6cm x 4cm x 5.9cm The BAT-SIGNAL model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW376 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 9.2cm x 9.7cm x 4.4cm The BATWING BATMAN VS SUPERMAN model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: ICX019 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 6.7cm x 5.1cm x 10.2cm Recommended age range: 14+ The LONDON EYE FERRIS WHEEL model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. It starts with 3 square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. It is a giant Ferris wheel on the south bank of the River Thames in London. Also known as the Millennium Wheel, its official name was originally British Airways London Eye, then Merlin Entertainments London Eye, between January 2011 and August 2014, EDF Energy London Eye and is now called the London Eye. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW323 Number of Sheets: 3 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 7.6cm x 3.2cm x 12.1cm The WAR MACHINE model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. James Rhodes was a US Navy pilot. He dons a modified version of the Iron Man armor given to him by Tony Stark and adopts the nickname War Machine. War Machine armor is designed for combat. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW303 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 4.5cm x 5.3cm x 9.5cm The MEGATRON model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. He is the founder of the Decepticon uprising and its most well-known and feared leader. Megatron has lost battles, but he has never truly been defeated. Even after his near-total destruction by AllSpark, he returned. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW302 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 5.1cm x 3.5cm x 8.6cm The SOUNDWAVE model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Soundwave has spent centuries making himself indispensable to the Decepticon cause. His body is packed with electronic communications equipment. It is capable of causing even the weakest transmission of the microwave background, deciphering the most difficult quantum code and jamming the most powerful signal. Along with his minions, he is one of the most effective weapons in the Decepticon arsenal. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW301 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 4.5cm x 3.1cm x 8.7cm The BUMBLEBEE model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Bumblebee has spent decades perfecting his fighting skills. With or without weapons, he is one of the most skilled fighters the Autobots have. He is dedicated to using his abilities to defeat the Decepticons, no matter where they appear. He is the little brother of the heroic or leading Autobot faction and a mascot, constantly striving to prove himself in the eyes of the other robots, especially their leader, Optimus Prime. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW292 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 9.8cm x 8cm x 4.8cm The UNSC PELICAN model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Available in a staggering number of unique models and variants, the D-79 Pelican dropship is the UNSC's most recognizable troop and materiel transport. These workspace ships are equally at home in orbit and in the atmosphere, and have even been pressed for use on short interplanetary voyages. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW293 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 8.3cm x 4.2cm x 7cm The UNSC MANTIS model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Mantis is an all-environment bipedal walker used by the UNSC military. An evolution of previous research and development involving military exoskeletons, the Mantis also integrates many technologies, such as shield generators and neural interface controls, created for the Spartans' MJOLNIR power armor. The Mantis weapons package consists of an M655 20mm rotary autocannon and an M5920 six-chamber rocket launcher. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW291 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 7.8cm x 4cm x 3.8cm The MASTER CHIEF HELMET model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Warthog is the UNSC's primary ground transport vehicle, with the M12B Force Application Vehicle (FAV) being the most ubiquitous variant. Equipped with a full rotation turret and heavy machine gun, the M12B FAV serves as a multi-role combat vehicle that can engage light armored vehicles and enemy aircraft with equal effectiveness. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW251 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 7.2cm x 5.6cm x 4.6cm Material: Metal The MILLENIUM FALCON model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. A legendary starship despite its humble origins and deceptively dilapidated exterior, the Millennium Falcon has been a factor in some of the Rebel Alliance's greatest victories over the Empire. Before Han Solo won it in a game of chance, it was owned by Lando Calrissian. Solo and his first officer, Chewbacca, flew the Millennium Falcon into movie history. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW269 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 10.5cm x 10.1cm x 5cm Material: Metal Recommended age range: 14+ The POE DAMERON'S X-WING FIGHTER model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The T-70 X-wing starfighter is an updated incarnation of the classic T-65B X-wing starfighter manufactured for the New Republic Starfleet. More expensive and complex than the earlier T-65B, the T-70 featured advanced weaponry and proved more versatile than its predecessor, and was essential in both aerial combat and capital ship-scale combat operations. Appropriate S-foil designs allowed for greater firing range, while four KX12 laser cannons offered single, double and quad firing modes. A built-in twin proton torpedo launcher with quick-change magazines allowed the use of alternative armaments. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW260 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 7.8cm x 5.1cm x 8.8cm Material: Metal Recommended age range: 14+ The SLAVE I model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The deadly ship was famous for its association with Jango Fett, a bounty hunter in Mandalorian armor. Fett filled the ship with weapons, from laser cannons and projectile launchers to seismic charges. After Jango's death, Boba Fett refitted the ship and made it his own. A generation after his father's death, the distinctive ship was still the last thing the fugitives wanted to see on their scanners. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW268 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 8.3cm x 3.4cm x 5.7cm Material: Metal Recommended age range: 14+ The FIRST ORDER SNOWSPEEDER model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. These fast and versatile light utility vehicles are useful for a variety of missions on Starkiller Base and other icy worlds. The First Order's favorite snowspeeder model is as simple as it is rugged: essentially a pair of seats, cargo deck, turbines, and a deck-mounted repeater blaster. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW258 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 8.3cm x 7.4cm x 3.2cm The SNOWSPEEDER model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. While stationed on Hoth, the Rebel Alliance modified T-47 airspeeders into snowspeeders, fast flying means of transport to patrol and defend their hidden base. It took some work to prevent the crippling cold from permanently grounding their air force, but Rebel ingenuity overcame Hoth's relentless elements. The T-47 hovercraft is a small wedge-shaped craft with two forward-facing laser cannons. On its rear bow is a harpoon cannon equipped with a heavy-duty tow cable. The snowspeeder is a two-man craft, with a pilot and a rear-facing tail gunner. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW266 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 7.5cm x 4.8cm x 10.8cm Material: Metal Recommended age range: 14+ The KYLO REN'S COMMAND SHUTTLE model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Kylo Ren's Command Shuttle was an Upsilon-class command shuttle used by Lord Kylo Ren, who was a member of the Knights of Ren and the First Order around thirty years after the Battle of Endor. The First Order's top officers travel in Upsilon-class command shuttles that resemble shadowy birds of prey. The enormous wings of these ships are packed with defensive systems to protect their valuable passengers. The upper wings contain advanced sensor arrays that scan for enemies, while the lower wings house efficient shield projectors and powerful jammers. Upon landing, the wings lift from flight mode and then retract, covering the upper wing sensor arrays with thick armor. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED