Item Condition: New Code: FMW023 Number of Sheets: 2 Sheets Difficulty Level: Moderate Dimensions: 6cm x 5.6cm x 6cm Material: Metal Recommended age range: 14+ The ARC DE TRIOMPHE model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Arc de Triomphe was inspired by Napoleon, who after his victory at Austerlitz on December 2, 1805, told his soldiers: "You will return home through the triumphal arches." The monument, located in Paris, measures 50 meters high by 45 meters wide by 22 meters deep FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW019 Number of Sheets: 1 Leaf Difficulty Level: Moderate Dimensions: 1.7cm x 1.7cm x 12cm Material: Metal Recommended age range: 14+ The BIG BEN model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Big Ben is the nickname for the large clock bell at the north end of the Palace of Westminster in London, although today the name also refers to the clock and clock tower. The bell weighs almost 14 tons and each clock face is 23 feet in diameter. It became fully operational on September 7, 1859 and today is one of the most prominent symbols of London at 316 feet high. The clock requires winding three times a week and pennies are periodically added to or removed from the pendulum clock to maintain its accuracy. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW018 Number of Sheets: 3 Sheets Difficulty Level: Moderate Dimensions: 11.5cm x 5cm x 7.3cm Material: Metal Recommended age range: 14+ The NEUSCHWANSTEIN CASTLE model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Neuschwanstein Castle is located in Bavaria, near the city of Fussen, and was Walt Disney's inspiration to create the Magic Kingdom. Neuschwanstein literally means "New Swan Stone", which is a reference to the "Knight of the Swan"; one of the characters in an opera by composer Richard Wagner. King Ludwig II began construction of the castle in 1869. Today, his fairytale castle stands as the most visited castle in Germany, welcoming more than 1,300,000 tourists a year. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

DISCONTINUED MODEL - LAST UNITS WORLDWIDE Item Condition: New Code: FMW011 Number of Sheets: 1 Leaf Difficulty Level: Easy Product Dimensions: 12cm x 2cm x 4cm Material: Metal Recommended age range: 14+ The HUEY HELICOPTER model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The most famous helicopter in the world is the Bell UH-1 Iroquois, better known as the Huey, which first flew in 1956. It gained fame during the Vietnam War and has appeared in many war films, including Apocalypse Now and Platoon. , as well as in numerous action and adventure films. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW009 Number of Sheets: 1 Leaf Difficulty Level: Easy Dimensions: 3cm x 3cm x 8.5cm Material: Metal Recommended age range: 14+ The CHRYSLER BUILDING model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Chrysler Building is an Art Deco skyscraper in New York City, located on the east side of Manhattan at the intersection of 42nd Street and Lexington Avenue. At 1,047 feet tall, it was the tallest building in the world for 11 months before being surpassed by the Empire State Building in 1931. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW007 Number of Sheets: 1 Leaf Difficulty Level: Easy Dimensions: 7.8cm x 3cm x 2cm Material: Metal Recommended age range: 14+ The CHECKER CAB model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Checker taxi is no longer on the streets of New York, but it was once the iconoclastic image of a New York City taxi. It was large and spacious, with checkered stripes on the sides. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW005 Number of Sheets: 1 Leaf Difficulty Level: Easy Dimensions: 6.5cm x 6.5cm x 3.2cm Material: Metal Recommended age range: 14+ The FOOKER D-VII Model Kit It is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Manfred von Richthofen praised this aircraft as the best he had flown. It offered excellent performance, but was safe and easy to fly. Richthofen's recommendation led to the first provisional order for 400 production aircraft. In total, Germany produced around 3,300 D-VII aircraft in the summer and autumn of 1918. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW003 Number of Sheets: 1 Leaf Difficulty Level: Easy Dimensions: 9cm x 9.5cm x 3cm Material: Metal Recommended age range: 14+ The P-51 MUSTANG model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The P-51 Mustang was a World War II long-range fighter aircraft that flew as a bomber escort over Germany. Powered by the British Rolls-Royce Merlin engine, it was unmatched by any other piston fighter aircraft of World War II. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW002 Number of Sheets: 1 Leaf Difficulty Level: Easy Dimensions: 5.5cm x 2.5cm x 3.3cm Material: Metal Recommended age range: 14+ The CABLE CAR model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The San Francisco cable car system is the world's last permanently operating manually operated system in the US and is among the city's most famous tourist attractions along with Alcatraz Island and Fisherman's Wharf. Cable cars operate on two routes from downtown near Union Square to Fisherman's Wharf and a third route along California Street. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW001 Number of Sheets: 1 Leaf Difficulty Level: Easy Dimensions: 15cm x 0.8cm x 4.5cm Material: Metal Recommended age range: 14+ The San Francisco Golden Gate Bridge model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Golden Gate is an art deco suspension bridge that spans San Francisco Bay and is one of the city's most enduring symbols. Its construction arose from the need to get from San Francisco to Marin and ferry traffic in San Francisco Bay had become too heavy. Construction of the Golden Gate Bridge began in 1933 and was completed in 1937. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW097 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 14cm x 2.5cm x 5.1cm The USS ARIZONA BATTLESHIP model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. She was a Pennsylvania-class battleship, built in the mid-1910s and modernized in 1931. She was bombed and sunk in the attack on Pearl Harbor on December 7, 1941, in which officers and crew died .  FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW201 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 7.5cm x 4cm x 3cm The T-34 TANK model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The T-34 tank was a Soviet tank produced between 1940 and 1958. Although its armor and armament were surpassed by later tanks of World War II, it is often considered the most effective, efficient, and influential tank design of the Soviet era. the Second World War.  FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW 052 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 7cm x 4cm x 4cm It is a simple open vehicle with two very large driving wheels on an axle below and slightly behind a single seat with the engine in front of the driver and two steering wheels below the engine compartment. This basic design has remained unchanged for many years. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW064 Number of Sheets: 1 Sheet Difficulty Level: Moderate Dimensions: 10.9cm x 9.2cm x 3cm Material: Metal Recommended age range: 14+ The DRAGONFLY model kit It is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. It has large multifaceted eyes, two pairs of strong transparent wings and an elongated body. Dragonflies are among the fastest flying insects in the world, capable of reaching speeds of more than 40 miles per hour. They are important predators that eat mosquitoes and other small insects such as flies, bees, ants and wasps. They are usually found around swamps, lakes, ponds, streams, and wetlands. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Code: MMS177 Number of Sheets: 3 Sheets Difficulty Level: Challenging Dimensions: 10cm x 4.2cm x 4.8cm The Metal Earth Phantom model kit It is an incredibly detailed engraved model, which is very fun and satisfying to put together. Starts with 3 4-inch square sheets of steel and ends in a 4.25" x 1.65" x 2.09" 3D model Simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: MMS183 Number of Sheets: 2 Sheets Difficulty Level: Challenge Dimensions: 9.2cm x 3.3cm x 1.5cm The Metal Earth Wheel Loader model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 2 4-inch square steel sheets, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and attach them at the attachment points. No glue or soldering required. Specifically designed to handle all jobs on your job site, from material handling and truck loading to general construction and warehousing. This machine is specially designed to be the right machine to perform your daily tasks. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW320 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 7.5cm x 2.5cm x 5.1cm The MJOLNIR model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. It is the favorite weapon of the Norse God Thor. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: ICX015 Number of Sheets: 1 Leaf Difficulty Level: Moderate Dimensions: 3.8cm x 3.8cm x 8.9cm Material: Metal Recommended age range: 14+ The LEANING TOWER OF PISA model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Leaning Tower of Pisa is the bell tower, or free-standing bell tower, of the cathedral of the Italian city of Pisa, known worldwide for its involuntary tilt to one side. It is located behind the Cathedral and is the third oldest structure in Pisa's Cathedral Square (Piazza del Duomo) after the Cathedral and the Baptistery. Leaning of the tower began during construction, caused by an inadequate foundation on soil too soft on one side to adequately support the weight of the structure. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

DISCONTINUED MODEL - LAST UNITS WORLDWIDE Item Condition: New Code: FMW070 Number of Sheets: 1 Sheet Difficulty Level: Moderate Dimensions: 12cm x 8.2cm x 5.2cm Material: Metal Recommended age range: 14+ The SCORPION model kit It is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. This predatory arachnid has eight legs and is easily recognized by a pair of prehensile claws and a narrow, segmented tail that is often carried in a characteristic forward curve over its back, and ends with a venomous stinger. Scorpions can grow up to 20 cm. Its venom has a fearsome reputation, but only about 25 of the nearly 1,500 species are known to have venom capable of killing a human. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: MMS184 Number of Sheets: 3 Sheets Difficulty Level: Challenging Dimensions: 13cm x 4.6cm x 3.5cm The Metal Earth Motor Grader model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 3 4-inch square steel sheets, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and attach them at the attachment points. No glue or soldering required. Cat® motor graders have become the industry standard for operational efficiency and overall productivity. The motor grader is designed to help you build and maintain the haul roads needed to support maximum efficiency in large mining operations. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: ICX009 Number of Sheets: 2 Sheets Difficulty Level: Expert Dimensions: 15.25cm x 4.3cm x 10.65cm Recommended age range: 14+ The QUEEN ANNE'S REVENGE SHIP model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. It starts with 3 square sheets of steel and ends in a 3D model. Simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. Queen Anne's Revenge was the name of the flagship of the English pirate known as Blackbeard. He used it for less than a year, but it was an effective tool in his prize-taking. In 1718, Blackbeard ran the ship aground in Beaufort Inlet, Carteret County, North Carolina, in the present-day United States. In late 1996, Intersal, a private contractor working for the state of North Carolina on marine reclamation, discovered the remains of a ship likely to be the Queen Anne's Revenge. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW042 Number of Sheets: 1 Sheet Difficulty Level: Moderate Dimensions: 10cm x 5.1cm x 2.1cm Material: Metal Recommended age range: 14+ The WRIGHT BROTHERS AIRPLANE model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. On December 17, 1903, Orville Wright piloted the first powered airplane to 20 feet over a windswept beach in North Carolina. The flight lasted 12 seconds and covered 120 feet. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW010 Number of Sheets: 1 Leaf Difficulty Level: Easy Dimensions: 3.2cm x 3cm x 10cm Material: Metal Recommended age range: 14+ The EMPIRE STATE BUILDING model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. The Empire State Building is the tallest building in New York City. This 102-story building rises 1,250 feet above the city at the intersection of Fifth Avenue and West 34th Street. Its name is derived from New York's nickname, the Empire State. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW091 Number of Sheets: 2 Sheets Difficulty Level: Moderate Recommended age range: 14+ Dimensions: 14.7cm x 11.3cm x 4.3cm The B-17 FLYING FORTRESS model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. It starts with 2 square sheets of steel and ends in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. It is a 4-engine heavy bomber used in World War II. It was a powerful, high-flying, long-range bomber that was able to defend itself and return home despite extensive battle damage. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED

Item Condition: New Code: FMW303 Number of Sheets: 2 Sheets Difficulty Level: Expert Recommended age range: 14+ Dimensions: 4.5cm x 5.3cm x 9.5cm The MEGATRON model kit is an incredibly detailed engraved model, which is very fun and satisfying to put together. You start with 4 4-inch square steel sheets and finish them in a 3D model, simply use the easy-to-follow instructions included with the sheet to remove the pieces, bend the tabs and connect them at the attachment points. No glue or soldering required. He is the founder of the Decepticon uprising and its most well-known and feared leader. Megatron has lost battles, but he has never truly been defeated. Even after his near-total destruction by AllSpark, he returned. FUN TO ASSEMBLE STEP 1 STEP 2 FILLED